A4 COPY PAPER CUTTING/SHEETING PACKING MACHINE
Copy Paper Cutting and Packing Machine Model DTCP 2-4Copy Paper Cutting and Packing Machine Model DTCP 2-4

Copy Paper Cutting and Packing Machine Model DTCP 2-4



Model: DTCP 2-4

Mob: 0086 13957777629
Tel: 0086 577 8833 6203
Fax: 0086 577 889 55 231
Email: cbaden@cbaden.net

Copy Paper Cutting and Packing Machine Model DTCP 2-4



Model: DTCP 2-4
PRODUCT INFORMATION

Copy Paper Cutting and Packing  Machine Model DTCP 2-4

Copy Paper Cutting and Packing  Machine Introduction :

Manufacturer of Cbaden Superior Machine Group design and build this Copy Paper Cutting and Packing  Machine Model DTCP 2-4,it is with the 2 unwinding roller the output is around 8 ream . It is the best choose among the manufactures who produce medium level products. This machine is suitable for cutting the large coil packaging material(such as Gloss photo paper, digital photo paper, ordinary paper, coated paper, board paper,  Gold or  Silver cardboard, holographic paper, cigarettes & wines packing and printing material .etc) , paper & plastic complex material and fiber material, etc.

This machine is fully automatic cutting and packing  the A4 ,the packing way for the A3 paper is by manual.

Copy Paper Cutting and Packing  Machine More detail :

1. Non-shaft paper rising shelves of the ground controlling system------ Two sets

2. Advanced tension controlling system ------ Four sets.

3.Four sets of anti-warping mechanisms------Four sets.

4. Longitudinal cutting knife groups------six sets.

5. Simultaneous cross-cutting knife groups-----One set.

6. High-speed paper feeding system----- One sets

7. Low-speed paper feeding system----- One sets

8. Waste paper automatically discharging system-----One set.

9. Making papers in order of 2D oscillation, srew rod lifting device of paper reams collecting system------One set.

10. PLC reams of paper counting device------One set.

 11.   Paper reams longitudinally and transverse discharging equipment-----One set.

12.   PLC error alarm machine haulting system and PLC controlling equipment ------One set.

Copy Paper Cutting and Packing  Machine Technical Paramete:

<-------- Can Move Left or Right -------->

Model

DTCP  2-4

Gross width

846mm

Net  width

840mm

Number  of cutting

2  rolls 4 slittings-A4 210mm(width)

Diameter of paper roll

400-1200mm

Diameter of paper roll's core

3"(76.2mm)-6(152.4mm)

Paper  grade

High  grade copy paper,writing paper, two-side offset paper etc.

Weight  of paper sheet

60-100g/

Length  of paper cutting

A4(297mm)

Paper quantity

0-500pages

Ream  height

65mm(Max)

Designing speed of paper cutting

160m/min

Times  of cutting

538/min

Cycle  time of ream exhausted

4.3/min

Production speed of paper cutting

130m/min

Times  of cutting

437/min

Cycle  time of ream exhausted

4  Cycles/min(8-12 reams/min)

Load  of paper cutting

(max)400g/(4×100g/)

Paper  cutting accuracy

±0.2mm(Permissible error)

Paper  cutting condition

1. Speed not change 2.Paper  roll with no breakage 3. Qulified paper rolls.

Transmission

AC  Frequency conversion,stepless speed regulating

Main  power source

3phase/4line/380v/50Hz

Adjustable voltage

220V  AC/22V DC

Installed capacity

35KW

Air  consumption

300NL/min

Pneumatic pressure

(Min)7bar---(Max)8.5bar

Machine  Weight

12T

Machine  dimension(cutting  machine)

16000×2750×2100mm


Copy Paper Cutting and Packing  Machine Technical Paramete:

<-------- Can Move Left or Right -------->

Productive capacity

8  reams/min

Function of roll overwrap paper

can be automatically cross cut and fed

8  sheets/min

Specification of packed object

210×297×50mm (Based on the height 500 pieces of copying paper.)

Wrapping Material

Roll  laminated paper

Sealing Method

Hot  melt glue

Power  supply

380V/3Phase/4Wire

Motor  power

5.1kw

Rubber  roller power

2.25kw

Compressed air

0.6-0.8 mpa

Paper  size(Lenght×Width)

550-560mm×386mm

Machine Weight

2T

Machine  dimension

4530×3050×1450mm


We are Copy Paper Cutting and Packing Machine Model DTCP 2-4 suppliers/manufacturers from china factory . We also can produce the Copy Paper Cutting and Packing Machine Model DTCP 2-4 according to the client’s requirement. We are always try our best to become the good Copy Paper Cutting and Packing Machine Model DTCP 2-4 manufacturers/suppliers and welcome the customer from all over the world to contact with us.
RELATED PRODUCTS
Copyright © 1998-2017 CBADEN Machinery (Paper Sheeting Machine) Group All Rights Reserved.  XML|   Professional Die Cutting Machine Manufacturer From China Factory
Mob: 0086 13957777629    Tel: 0086 577 8833 6203    Fax: 0086 577 889 55 231    Email: cbaden@cbaden.net

Friend Link: Solar Panel Paper Cutting Machine Packaging Machinery 阿辛达外语培训 阿辛达英语培训 Printing Machine 阿辛达培训
Waste Paper Stripping MachineDie Cutting MachineRotary Packing MachinePlastic Bag Making MachineRotary Packaging MachineAutomatic Pillow Type Packing MachineFilm Blowing MachineFilm Blowing MachinePaper Cutting MachineFoil Stamping MachinePaper Bag Making MachinePaper Cup MachinePaper Bag Making MachineFlexographic Printing MachineDual Action AirbrushMini Airbrush CompressorIpratropium Bromide殡仪馆管理系统PDC Parking SensorMetal Strap Seal